SILTMAX TYPE III DOT

Suitable for use in tidal zones, rivers, and bays, SiltMax Type III DOT Turbidity Curtain (Specifications) is designed for rapid deployment and is engineered for medium flows. This curtain is permeable to allow water flow while retaining the silt and sediment. View DOT requirements by state.

The sturdy design of Elastec SiltMax Type III DOT ensures reliable performance while resisting clogging. Different filter cloths can be used to accommodate the design of the project and the type of sediment present.

Siltmax Type III Turbidity Curtain meets AASHTO M-288-92 Erosion Class A specifications. The permeable, woven geotextile skirt is standard on the SiltMax Type III. This curtain is equipped with dual tension cables under the flotation.

Depths other than 5 ft are available by request and are available in a few days. Contact us for pricing and availability.

SILTMAX TYPE III DOT VIDEO

SiltMax Type 3 Specifications

Fabric:18 oz. Vinyl PVC
Float Size:6 inch / 15 cm Square EPS Marine Quality
Net Buoyancy:6 inch / 15 cm - 13 lb/ft / 19.2 kg/m
Load Components:9,800 lb Galv. Steel Cable
7,600 lb Galv. Steel Chain
Ballast:5/16 inch Galv. Chain
Depth:5ft / 1.5 m (custom depths available)
Length:100 ft / 30 m or 50 ft / 15 m

TURBIDITY CURTAIN QUESTIONNAIRE

In order that we may recommend the best Turbidity Curtain for your project, please provide the following information. We have included some questions that will help us better understand your needs. Please answer as many as possible. If the flow rate is high, Elastec can provide modeling data to determine anchor spacing and feasibility of systems.

Name(Required)
form-spacer
form-spacer
Would you like to receive information about Elastec's other products?(Required)
This field is for validation purposes and should be left unchanged.
Scroll to Top