SILTMAX TYPE II DOT

Suitable for mild currents, waves, and wind the SiltMax Type II DOT Turbidity Curtain (Specifications) is designed for rapid deployment, fast storage and handling. It is also appropriate for most regulated applications. SiltMax Type II DOT barrier is offered with impermeable and permeable options.

SiltMax Type II DOT Turbidity Curtain is equipped with a tension cable under the flotation and aluminum joint connectors with anchor points to anchor the curtain in flow.

SiltMax Type 2 DOT barrier is specifically designed for in-water control of silt and turbidity around dredging activities, pile driving rip-rap installation, and demolition work. The economical design makes it a contractor’s project favorite for moving water and waves typically found in inter-coastal waterways, estuaries, and rivers.

Depths other than 5 ft are available by request and are available in a few days. Contact us for pricing and availability.

SILTMAX TYPE II DOT VIDEO

SiltMax Type 2 DOT Specifications

Fabric:18 oz. Vinyl PVC
Float Size:6 inch / 15 cm Square EPS Marine Quality
Net Buoyancy:6 inch / 15 cm - 13 lb/ft / 19.2 kg/m
Load Components:9,800 lb Galv. Steel Cable
7,600 lb Galv. Steel Chain
Ballast:1.06 lb per foot Galv. Chain
Depth:5ft / 1.5 m (custom depths available)
Length:100 ft / 30 m or 50 ft / 15 m

TURBIDITY CURTAIN QUESTIONNAIRE

In order that we may recommend the best Turbidity Curtain for your project, please provide the following information. We have included some questions that will help us better understand your needs. Please answer as many as possible. If the flow rate is high, Elastec can provide modeling data to determine anchor spacing and feasibility of systems.

Name(Required)
form-spacer
form-spacer
Would you like to receive information about Elastec's other products?(Required)
This field is for validation purposes and should be left unchanged.
Scroll to Top